Marine Powerful Hydraulic Automatic Towing Winch

Product Description

Mooring winches secure the shipboard end of mooring lines, provide for adjustment of the mooring line length and compensate for changes in draft and tide. General requirements for shipboard mooring winches are dealt with within ISO Standards 3730 and 7825.

Winches can be categorized by their control type (automatic or manual tensioning), drive type (steam, hydraulic or electric), by the number of drums associated with each drive, by the type of drums (split, undivided), and by their brake type and brake application (band, disc, mechanical screw, spring applied).

Automatic tension mooring winch, self-tension winch – Winches designed to heave in automatically whenever the line tension falls below a certain pre-set value. Likewise, the payout if the line tension exceeds a pre-set value. The use of the self-tension winches is not recommended except for mooring deployed at 90° to the ship axis.

Manual tension mooring winch – Manual winch always requires a person to handle the controls for heaving or rendering.

Non-split drum mooring winch – The undivided drum winches are commonly found on smaller ships. It is often difficult to spool and stow the wire on such a drum satisfactorily; when wires are handled directly off the drum, the final turns of the outer layer when under tension tend to bite into the lower layer. This could result in possible wire damage and difficulties when releasing the line. To reduce this problem, the winch with a non-split drum should be placed at a sufficient distance from the fair lead to ensure that the wire can be properly spooled.

Split drum mooring winch – A winch with a drum divided by a notched flange into a tension section and a line storage section.